Servo Issue?

January 8, 2016, 2:57 pm

≫ Next: Buying chassis need help

≪ Previous: First drift body wip

$

0

0

I have a MSD MS01D along ran by the RC OMG 10.5T brushless motor along with the D Run 120a ESC and their servo. Now the issue I'm having is the car likes to turn on its own. I can try to get it to drive straight and it'll just go either left or right. And after a turn it doesn't like to re center its steering. What can it be guys! Thanks in advanced!

---

Buying chassis need help

January 9, 2016, 3:51 am

≫ Next: Does anyone have any advice Brushed motors?

≪ Previous: Servo Issue?

$

0

0

OK guys so in a few days im buying a roller " tamiya trf415 " and i was wondering if it was a good buy and what to look out for,
Its comes with stealth mounts and some stylish wheels but im going to be drifting so that isn't that important

what i know about it is that its got a custom counter-steer setup using some 3 Racing D3 parts and hes said that the car is roughly 60 : 40
Also i already bought Velcro straps for the battery but he says he just uses 2 pieces 1 one the bottom of the battery and one on the chassis.
this is going to be my first cs chassis and tamiya chassis so i want to know what to look out for, pictures below,

( in the pictures there also a front mount, battery and a servo but those are not included )
BTW im paying him $120AUD

I am buying locally and have dealt with this guy before.

Thanks in advance.

  12498979_10153924085454040_1189222303_n.jpg (Size: 90.62 KB / Downloads: 5)

  12512008_10153924085369040_1692133094_n.jpg (Size: 65.16 KB / Downloads: 5)

  12516193_10153924085519040_63786990_n.jpg (Size: 53.01 KB / Downloads: 6)

  12528668_10153926092584040_131833704_o.jpg (Size: 165.23 KB / Downloads: 6)

  12539972_10153924085504040_297843015_n.jpg (Size: 59.17 KB / Downloads: 5)

Does anyone have any advice Brushed motors?

January 9, 2016, 5:13 am

≫ Next: New from Fresno ca

≪ Previous: Buying chassis need help

$

0

0

I find any motors in rc Mart yeah racing and snow panther what this choose?

Discovery Air cihazımdan Tapatalk kullanılarak gönderildi

New from Fresno ca

January 9, 2016, 8:17 am

≫ Next: RXX Setup Tips

≪ Previous: Does anyone have any advice Brushed motors?

$

0

0

so when I was younger I was really into racing my tc3 on a road circut. Over the holidays my little cousin got a car, so I pulled mine out, that's when I saw all this stuff for RC drifting. I went and bought myself some hpi hard tires me that's where I'm at.

RXX Setup Tips

January 9, 2016, 9:04 am

≫ Next: Wheel offsets

≪ Previous: New from Fresno ca

$

0

0

New to RWD, looking for some good setup tips for my RRX . I'm running a 10.5 and the surface is smooth concrete. Ideally looking for tire hardness recommendations and spring shock oil suggestions.


Sent from my iPad using Tapatalk

Wheel offsets

January 9, 2016, 5:58 pm

≫ Next: Battery selection for Yokomo DIB v2

≪ Previous: RXX Setup Tips

$

0

0

Hey guys how do some of you get big offsets to fit?
I have a ms01drtr with a rx7 what offset do you think i could fit? Post pics of some big offsets :D

Battery selection for Yokomo DIB v2

January 10, 2016, 4:07 am

≫ Next: AWD D4 must haves

≪ Previous: Wheel offsets

$

0

0

Hi guys, I'm new to a drifting area where I used to toured with XRAY T3 2 years ago. I am now having an unfinished built my Yokomo DIB v2 which hopefully will be completed my build by this weekend.

I need help on a battery selection for my DIB since I saw a lot of pics here using a shorty (4200-4400mah). How long will it lasted with these capacity? My set up will by OMG ESC with 10.5T motor.

When I was touring with my XRAY, the bigger capacity was better in everyway (excepted weight) I used to have some 6000mah and they last me with 25-30 on track.

but with my new DIB drifting chassis, the battery slot under the top deck is really a problem and it's narrowed me down with battery choices. So I need your comments on smaller capacity or a shorty will give a good playtime with my set up.

Thank you so much

AWD D4 must haves

January 10, 2016, 10:09 am

≫ Next: Tetsujin super wheels vrs brakes

≪ Previous: Battery selection for Yokomo DIB v2

$

0

0

I'm ordering my AWD d4 soon and was wondering what else I should pick up. What are some weak points? What should i mod right away? Are there any option parts that i should pick up?

Sent from my LG-D850 using RC Drift Handbook

---

Tetsujin super wheels vrs brakes

January 10, 2016, 5:00 pm

≫ Next: double S15 builds

≪ Previous: AWD D4 must haves

$

0

0

Hey guys and girls,

Just wondering if anyone else has had any issues with Tetsujin super wheels and brake calipers? I just got my D4 all together and put my MST big brake kit on and the clips that hold the two piece wheels together are not clearing the calipers.

double S15 builds

January 10, 2016, 7:09 pm

≫ Next: Gt86 rocket bunny v2 build

≪ Previous: Tetsujin super wheels vrs brakes

$

0

0

Couldn't decide which Body I liked better, Tamiya coppermix, or Yokomo, so I did what any addict would do, and decided to get both... neither one is complete yet, still got some little accent pieces coming in the mail still, but I thought Id share them so far... 

First - 
body - tamiya coppermix S15
wheels - MST changeable offset wheels
Paint - Tamiya PS-17, backed with black.






Second - 
Body - Yokomo S15
Wheels - MST changeable offset
Paint - Tamiya PS- 59 backed with black




ill post some more pics when i complete them.  enjoy!

Gt86 rocket bunny v2 build

January 11, 2016, 7:40 am

≫ Next: high offset wheel options

≪ Previous: double S15 builds

$

0

0

So all my parts have arrived for my gt86 minus the paint, its still too cold to paint in Scotland. But I can at least get it all trimmed up, my body shell has arrived today to find out it is all pre drilled...not impressed, dont want to stick the kit on with horrible holes all over it [DISAPPOINTED FACE]

high offset wheel options

January 11, 2016, 1:40 pm

≫ Next: Damaged battery wire

≪ Previous: Gt86 rocket bunny v2 build

$

0

0

i have 9mm offset wheels all around on my sprint 2 with 67 camaro body. the front is perfect, but the rear tucks quite a bit. i really want the flush look. i think i need somewhere close to 13mm offset wheels but ive only found 2, both are by scale dynamics. just wondering if theres any others.

Damaged battery wire

January 11, 2016, 3:44 pm

≫ Next: Replica 180sx

≪ Previous: high offset wheel options

$

0

0

I was just using my car and when I stopped to take the battery out I noticed the red cable rubbed on the ground and got frayed exposing the inside. I don't intend to charge it up again but is it safe to have around?

Replica 180sx

January 11, 2016, 8:40 pm

≫ Next: First RC drift Project

≪ Previous: Damaged battery wire

$

0

0

Hey guys, I'm trying to make a replica of my car and I'm just lookin for some good tip and tricks mabey some products to help. I have a matrixline body and some wheels like mine on order. I still need a 326power wing and some other odds and ends. One question I have is do the regular 180sx light buckets fit the matrixline body well? Is this a good body to use or should I start over... Here are some pictures of my Rc and my actual car.
  ImageUploadedByTapatalk1452573530.302125.jpg (Size: 654.89 KB / Downloads: 7)
  ImageUploadedByTapatalk1452573609.240399.jpg (Size: 137.71 KB / Downloads: 7)
  ImageUploadedByTapatalk1452573629.642645.jpg (Size: 128.28 KB / Downloads: 7)
  ImageUploadedByTapatalk1452573640.126468.jpg (Size: 168.76 KB / Downloads: 7)
  ImageUploadedByTapatalk1452573649.294927.jpg (Size: 556.18 KB / Downloads: 8)


Sent from my iPhone using Tapatalk

First RC drift Project

January 13, 2016, 2:07 am

≫ Next: RE-Xtreme RC DRB-REW RWD Conversion _Update

≪ Previous: Replica 180sx

$

0

0

Im new to the Forum and kinda new to rc drifting. I cant really say i've never had an rc drift car but ive never had a Real Hobby Grade RC drift car. My first was many years ago when i was a little kid, i had an XMOD that i did the drift conversion too, i still have it but its not a real drift car. 

I deployed about 3 months ago and thought while i was out here i might as well get a hobby to keep me busy on slow days. I bought the 3Racing Sakura D4 Rwd chassis. did the minor Boom Racing upgrades for steering. Omg Servo with a yeah racing Gyro. the ESC and motor i got off amazon is a skyrc Cheetah 60A ecs and 10.5 turn Sensored brushless motor(great combo for $75). To control everything i bought a FlySky FS-GT3B 3 channel radio and receiver(also on amazon for like $40, great buy except it doesnt come with instructions).

I have a Pandora RC S13 Silvia body that i did a pretty shitty job painting cause i didnt have the right paint. I made a Custom Wing out of scrap metal that resembles the BCL universal Atmosphere demolisher wing(not perfectly but still awesome)

Over all its a great platform and i see alot of good things in the future for this build as more parts become available. 

I never had a 50/50 or CS drift car so jumping straight into RWD RC drifting is a learning experience but i know the Concept of real drifting well so i can transfer some of my knowledge over to this without much confusion. I am still learning and everyday i get alittle better.

  image.jpg (Size: 611.08 KB / Downloads: 0)

---

RE-Xtreme RC DRB-REW RWD Conversion _Update

January 13, 2016, 4:58 am

≫ Next: HPI sprint 2 rwd?

≪ Previous: First RC drift Project

$

0

0

My RWD conversion is now complete.

Ive sold 5 as kits , sold 3 as full builds and kept 3 for myself including an upgraded prototype. I've got 4 on the way for a few reservations.



New black twill and Silver SSG are pretty cool

RE-Xtreme RC .RSG. Design
DRB-REW ( Rear Evolution Weight Shift ) Conversion Set

1 x 2.5mm Main Chassis Plate

A Contents

Main Component Set
 1 x 2.0 mm Carbon Upper Deck
 1 x 2.0 mm Battery Mount
 1 x 2.0 mm Bridge Spacer Set (2pcs)

RWD Specific Optional parts.
 1 x 2.0 mm Carbon Wiper Extension set Forward Narrow (2pcs)
 1 x 2.0 mm Carbon Wiper Extension set Forward Wide (2pcs)
 1 x 2.0 mm Carbon Wiper Extension set Rearward Long (2pcs)

Optional Parts
 1 x 2.0 mm Carbon Bulkhead Support (2PCS)
 1 x 2.0 mm Front Bulkhead Servo Mount 

B Contents

Weight Shift Component Set
 5.0 mm ( 2.5 mm x 2 ) Bulkhead Spacer Set ( 10 pcs)
       2 x 2.5 mm Motor Mount - Left
       2 x 2.5 mm Pulley Mount - Right
       2 x 2.5 mm center BulkHead
       2 x 2.5 mm Front Bulkhead
       2 x 2.5 mm Rear Bulkhead

 1 x 3.0 mm Carbon Front Shock Tower
 1 x 2.0 mm Carbon Front Upper Arm Support
 1 x 3.0 mm Carbon Rear Shock Tower

C Contents

Battery Support Spacers
 4 x 4 mm x 18 mm Carbon Spacers
 4 x M3x30mm Stainless Steel Countersink Screw

 17 x M3x12mm Stainless Steel Countersink Screw



tried to box up in a professional-ish manner. Small quantities means exact size boxes are a DIY proposition.



Prototype is now using normal DRB ackerman bar with VX knuckles and REW extensions. I'll switch to twin servo soon.

VX front knuckles are awesome.


 
DP wipers are a good option. REVERSE motor direction required for normal spur/pinion.

Note front centre bulkhead servo position is available. Next setup on this chassis will be an inverted servo between the bulkhead.



Ninja spec. GRK Slide Rack. Now being setup for duty with new OD front knuckles. Review to come.



Customer Build. WUN items will be used up front. Custom anodising will be employed.

deciding final spec at the moment. loving the new black twill though.

HPI sprint 2 rwd?

January 13, 2016, 6:17 am

≫ Next: Noob building up a Sakura D4 AWD - Help

≪ Previous: RE-Xtreme RC DRB-REW RWD Conversion _Update

$

0

0

I just recently got a sprint 2 and I can't get used to the awd drifting. I drift a 1:1 car so I keep trying to incorporate those techniques into this but it's very different. I want to go rwd with this chassis but I've had people try to talk me out of it because of steering angle or oversteering. So has anyone here done the rwd conversion. If so what mods do you recommend, front engine? Anything for extra angle? And also what pulley do you run, right now I have a 18t rear pully with a locked diff. Thanks for the help guys!


Sent from my iPhone using Tapatalk

Noob building up a Sakura D4 AWD - Help

January 13, 2016, 7:06 am

≫ Next: 3Racing Sakura D4 RWD RC Drift Chassis Timelapse Build

≪ Previous: HPI sprint 2 rwd?

$

0

0

Hi guys,

A few questions for my first rc drift build: - 

1. The gearing is stock for now so what pinion should I install? I will be running a SV3 4600kv combo initially.
2. Do i need any specific size of servo (low profile) or can I throw in any 1:10 scale car servo?
3. What should my first upgrades be?

Thanks for your assistance!

Cheers

Fraser

3Racing Sakura D4 RWD RC Drift Chassis Timelapse Build

January 13, 2016, 10:15 am

≫ Next: Bad Bunny Rocket Bunny FD RX-7

≪ Previous: Noob building up a Sakura D4 AWD - Help

$

0

0

Check out the time lapse of the 3racing D4 Sakura RWD RC Drift Chassis build by DriftMission.com. This is one of the most popular budget choices for entry level RWD chassis. The build took around 5 hours to complete and we will have more video to come of this chassis in action soon! __ Royalty Free Music by Kevin MacLeod ~ EDM Detection Mode

Posted on Wed, 13 Jan 2016 18:07:21 +0000 at http://driftmission.com/3racing-sakura-d...pse-build/
Comments: http://driftmission.com/3racing-sakura-d...d/#respond

Bad Bunny Rocket Bunny FD RX-7

January 13, 2016, 5:46 pm

≫ Next: Fast battery chargers with Tamiya connectors?

≪ Previous: 3Racing Sakura D4 RWD RC Drift Chassis Timelapse Build

$

0

0

I recently finished up my latest body project.  It is a Tamiya RX-7 with the Demi Works Rocket Bunny body kit that I am calling the Bad Bunny.  Along the way RC P!PES asked if I wanted to collaborate and help him show off a new product line, the "BigAss CF Muffler".  I was honored that he chose to work with me on this project.  The Demi Works kit was pretty tricky to work with, and I spent a lot of time trimming it to fit just right.  I am really happy with the result, and it was worth the effort.  The P!PES BigAss CF Muffler fits the look of this car perfectly.  I also used a V2 light kit from P!PES, that I am really happy with.  The lighting effects are really cool, and the compact size and light weight are nice, too.  Special thanks to Randy Beard of Rare Arts USA for hooking me up with the windshield banner, and for stocking lots of great detail products that I used on this build.